KOKI COMPANY LIMITED KOKI COMPANY LIMITED

Side balls

Table of contents

What is side ball?

Side ball is a solder ball that is formed on the side of a chip component.
If the size of “side ball” or “capillary ball” is too large, it could be moved by an external impact, caught in between component electrode, and cause short circuit.
If side ball size or number is regulated, they it may be necessary to be removed or cleaned.

Side ball occurrence mechanism

Ways to reduce the side ball occurrence

Component, PCB and Stencil

– Reduce the amount of solder below the chip
– Increase the frequency of stencil cleaning to reduce the print bleeding
– Adjust the component mount height (lighter mounting pressure) to avoid squishing the solder paste when mounting

Reflow Profile

– Reduce the first ramp-up speed to prevent heat slump
– Solder paste is prone to slump in N2 reflow as there is no influence from oxidation

Print

– Adjust print condition (squeegee speed and pressure, stencil release speed, etc.) to prevent solder paste slump

Contact Us

For any requests for estimates, product information, technical questions, etc. please reach out to us.