KOKI COMPANY LIMITED KOKI COMPANY LIMITED

  1. ホーム
  2. Keywords
  3. Challenge
  4. Head-in-pillow resistance

Head-in-pillow resistance

Table of contents

What is head-in-pillow issue?

Head-in-pillow is a soldering defect where solder paste and BGA solder ball did not make a contact.
With a shrinking size of electronic devices and their PCBs, use of small-footprint components, such as BGA or CSP, is increasing. With this trend, head-in-pillow prevention is getting attention.

Head-in-pillow mechanism and issues associated with it

Head-in-pillow occurs when the solder ball on BGA is heated while it is away from the printed solder paste on the PCB soldering pad due to various reasons (e.g., warped package, insufficient solder paste volume or the component deformation during reflow. This affects solder ball and solder paste.

Main impact

  • Oxidation of the solder ball surface will be promoted.
  • If the flux in the solder paste has low heat-resistance, activation force will be exhausted faster.

Head-in-pillow prevention

  • Select a solder paste with a flux with good heat resistance
  • Select components that can mitigate thermal warpage
  • Prevent thermal warpage or oxidation through reflow profile
  • Prevent solder paste print variance

Contact Us

For any requests for estimates, product information, technical questions, etc. please reach out to us.